Hi all, I have a problem with Fill and nozzle flush on Facs Vantage SE + turbo optional I work at 20 PSI and when the nozzle is clogged I put on fill and I push the bottom nozzle flush, but the stream go to back very slowly and is not enough to clean the nozzle. This happen also when the nozzle is not clogged!! Any comments are welcome Many thanks in advance Simona -- Simona Ronzoni Flow Cytometry and Imaging Core Experimental Oncology Department European Institute of Oncology via Ripamonti, 435 20141 Milan Italy Phone: ++39-02-57489880 Fax: ++39-02-57489851 e-mail: simona.ronzoni@ifom-ieo-campus.it http://www.ifom-ieo-campus.it http://imaging.altervista.orgReceived on Fri Dec 16 11:18:00 2005
This archive was generated by hypermail 2.1.8 : Sat Jan 14 2006 - 22:04:00 EST
